Importance of Water Based Paint
Standardized ground markings are required in all airports to provide clear directions to both air and ground personnel. Our high-quality markings will ensure a safe and efficient airport, whether the pilot is taxiing to the runway or the ground crew is transporting luggage from one terminal to another. Our airport markings provide a superior, long-lasting finish using the best technology and materials.
Technical Specifications
For runway and airfield marking, roadex water based paint conforms to FED specifications TTP-1952d.
| Viscosity | Thixotropic |
| Binder Type | Modified Acrylic Copolymer |
| Pigment | Weather Resisting Pigments and Pigments Extenders |
| Colors Available | White, Yellow, Red, Black |
| Application | Airless Spray Machine, Brush, Roller |
| Dry Time | a) Surface Dry: within 15 minutes b) Hard Dry: 1 Hour |
Application Method for Road Markings
- Allow fresh concrete to dry for at least three weeks before applying this paint. The surface must be dry, clean, and free of contaminants.
- The ambient temperature must not be below 10°C or above 40°C while the paint is applied.
- In the case of an airless spray system, use a minimum of 200-230 DFT. Apply at least 2-3 coats with a 20-minute interval between each coat if using a roller or brush.
Storage and Packing
Containers of 4 and 16 liters are available. Avoid direct sunlight by storing it in a dry, shaded location. The shelf life is one year when stored properly in the original sealed container at 15 to 35°C.
Precautions and Safety
While handling the material, avoid contact with the skin, eyes, or inhalation. Wear protective clothing, gloves, goggles, and so on. Environmentally friendly. No VOC.
Reviews
There are no reviews yet.