Importance of Water Based Paint
Standardized ground markings are required in all airports to provide clear directions to both air and ground personnel. Our high-quality markings will ensure a safe and efficient airport, whether the pilot is taxiing to the runway or the ground crew is transporting luggage from one terminal to another. Our airport markings provide a superior, long-lasting finish using the best technology and materials.
For runway and airfield marking, roadex water based paint conforms to FED specifications TTP-1952d.
|Binder Type||Modified Acrylic Copolymer|
|Pigment||Weather Resisting Pigments and Pigments Extenders|
|Colors Available||White, Yellow, Red, Black|
|Application||Airless Spray Machine, Brush, Roller|
|Dry Time||a) Surface Dry: within 15 minutes
b) Hard Dry: 1 Hour
Application Method for Road Markings
- Allow fresh concrete to dry for at least three weeks before applying this paint. The surface must be dry, clean, and free of contaminants.
- The ambient temperature must not be below 10°C or above 40°C while the paint is applied.
- In the case of an airless spray system, use a minimum of 200-230 DFT. Apply at least 2-3 coats with a 20-minute interval between each coat if using a roller or brush.
Storage and Packing
Containers of 4 and 16 liters are available. Avoid direct sunlight by storing it in a dry, shaded location. The shelf life is one year when stored properly in the original sealed container at 15 to 35°C.
Precautions and Safety
While handling the material, avoid contact with the skin, eyes, or inhalation. Wear protective clothing, gloves, goggles, and so on. Environmentally friendly. No VOC.